SWEDEN
INTERNATIONAL
Built-in relay with 2 channels - Double Switch 2 (2x1.15kW)
SKU: FGS-223Fibaro FGS-223 - GEN5 Insert Switch from Fibaro, max 10 A total!
- Double built-in relay with energy measurement.
- Remote power switch installed behind existing switch
- Z-Wave
- Control two power sources (e.g. lights) with Z-Wave system or manually on the physical wall switch
)
- Product description
- Specifications
Fibaro's dual switch can be controlled via existing wall switches or through a Z-wave system (app, controller, scheduling, or sensors).
Function
Switch for two power sources on and off. Can control two lights in your home and schedule on/off times. Measures energy consumption and allows you to keep track of current consumption as well as accumulated consumption/instant power on both channels. The device has encrypted connection with AES-128. Different button presses can be set to mean different things through your Z-Wave hub.
Highly accurate energy measurement: +/-1.1% for powers above 5W
Protocol
Fibaro's dual switch uses Z-Wave to communicate with other devices and the controller. Z-Wave Plus certified.
Installation
Installed behind existing switch and works with both spring-loaded and regular wall switches.
- Voltage: 110-230V AC
- Temperature range: 0-35 °C
- Dimensions: 42.5 x 38.25 x 20.3 mm
- For installation in device boxes: Ø 50 mm
- Max current: 6.5A for resistive load per channel, max 10A total load.
- Installation requirements: Maximum 10A fuse in electrical panel.
- Unit controlled by: Radio / push button.
- Radio signal power: 1mW
- Radio frequency: 868.4 MHz (EU)
- Range: Up to 50m outdoors, up to 30m indoors
| Voltage: | 230V AC 50Hz |
|---|---|
| Size (WxDxH): | 42.5 x 38.25 x 20.3 mm |
| Radio technology: | Z-Wave |
| Talks to Homey: | Yes |
| Works with SmartThings: | Yes |
| Works without neutral wire?: | No |
| Dry Contact: | No |
| Talks to FutureHome: | Yes |
| Min power (W): | 0 |
| Z-Wave plus: | Yes |
| Max power (W): | 1495 |
| Assembly type: | Mounting |
