Sunricher

Drivdon Z-wave 1 channel 12VDC 50W - Dimmable - Constant Voltage.

SKU: SRP-ZV9105-12-50-CV
56.90 €
This product is out of stock.
Out of stock
Delivery: -

• Dimmable Constant Voltage LED driver, Max. output power 50W

• 1 channel 12VDC constant voltage output

• Class II power supply, fully isolated plastic case

• Rubycon capacitors

• Built-in active PFC function

• High power factor and efficiency, PF > 0.9, Efficiency > 85%

• Compliant with Safety Extra Low Voltage standard

• Short circuit, over load, over temperature protection

• Z-Wave Plus enabled slave controller

• Compatible with universal Z-Wave gateway or primary controllers

• Smooth and deep dimming to 0.1% without flickering, no buzzing noise

• To control constant voltage single color LED lighting

• IP20 rating, suitable for indoor LED lighting applications

  • Tip
    Tell a friend
  • WISH
Share:

SRP-ZV9105-50W-CV is a 50W Dimmable Constant Voltage LED Driver with 1 channel 12VDC output. It is designed with 200-240VAC input. Power factor of the driver can be over 0.9 and efficiency is higher than 85%. It enables smooth and deep dimming to 0.1% without flickering and buzzing noise.

The constant voltage driver is designed with Z-Wave Plus control interface which can be included to Z-Wave network and be controlled from your controller or hub interface. The driver can be compatible with universal Z-Wave gateway or primary controller. In addition, the Z-Wave device can bind with Z-Wave remote or wall controllers and be controlled by them.


Output:
 LED Channel: 1
 DC Voltage: 12 VDC
 Max. Current: 4.16 A / 2.08 A
 Voltage tolerance: ±1%
 Rated Power: Max 50 W

Input:
 
Voltage Range: 200-240V AC
 Frequency Range: 50/60 Hz

Control:
 
Dimming interface: Z-wave
 Dimming Range: 0%-100%
 Dimming Method: Pulse Width Modulation

Protection:
 
Short Circuit: Yes, recovers automatically after fault condition is removed
 Over Current: Yes, recovers automatically after fault condition is removed
 Over Temperature: Yes, recovers automatically after fault condition is removed

Rating:
 IP20



Voltage: 230V AC 50Hz
Size (WxDxH): 210 x 50 x 32 mm
Z-Wave plus: Yes
Max power (W): 50
Assembly type: Mounting