Fibaro HC3/Lite
Fibaro HC2/Lite
Home Assistant
Homey Pro
Nexa
Z-Way
Telldus ZNet Lite V1/V2
Smartthings
Animus Heart
- Product description
- Specifications
Product description
DIN-rail, 1-way Universal Dimmer from Qubino - ZMNHSD1 with Power Metering feature.
This DIN-mounted dimmer module can be used for dimming of light or to manage the speed of a fan. Supports control of Low Voltage halogen bulb with an electronic transformer and dimmable Compact Fluorescent light. Qubino dimmer also supports Classical Incandescent lights, halogen lamps operated by 230V AC (High Voltage Halogen), and dimmable LED lights.
Module measures Power consumption of the bulb or fan. It is designed to act as a repeater in order to improve the range and stability of the Z-Wave network.
- Communicates via Z-Wave Plus RF (868,42 MHz)
- Range: up to 50m free field, up to 30m in buildings
- Group for Association: 5 (Group 1 supports 1 node, Group 2 - 5 supports 16 nodes)
- For ohmic, inductive and capacitive loads, e.g. incandescent lamps, dimmable wound transformers, dimmable electronic transformers, dimmable LED and CFL lamps (Do not connect any mixed loads)
- With memory function of the last lighting level settings
- Module supports mono-stable and bi-stable switches (input I)
- Dimmer type: Trailing edge (bidirectional MOSFET switch)
- Load: 200W (230V AC); 24W (24V DC) (for resistive loads)
- Load for fan motor: Max 100W mono-phase asynchronous motor
- Power Metering feature
- Power measurement accuracy: ±2W
- Return to previous status after power loss
- Can be programmed to send "All ON" and "All OFF" commands
- Can be programmed with Double-click function (set to maximum dimming value)
- Power consumption: 0,7W
- Display elements: LED for status display
Attention! This dimmer module is also suitable for dimming of low-voltage halogen lighting, CFL tube lamps, and LED-based lamps.
The dimmer does not work for every installation because not every transformer, CFL, or LED can be dimmed. Dimmable electronic transformers, CFLs, and LEDs as a standard are marked as "DIMMABLE". Test the combination first!
Non-compatible light devices may work but are likely to produce light flickering and/or an audible humming or buzzing noise when dimmed. This noise and/or flickering is usually a symptom of internal stress, which in turn can cause failure of the connected device or dimmer.
This is the new version with a built-in fuse - external fuse is no longer needed.
Specifications
Maximum recommended loads:
Conventional incandescent: 200W
Halogen lights: 90W
LED bulb: 40W
Low Voltage Halogen bulbs with electric transformer: 70W
Conventional incandescent: 200W
Halogen lights: 90W
LED bulb: 40W
Low Voltage Halogen bulbs with electric transformer: 70W
Voltage: | 230V AC 50Hz |
---|---|
Voltage: | 24-30V DC |
Works without neutral wire?: | No |
Min power (W): | 0 |
Z-Wave plus: | Yes |
Max power (W): | 200 |
Max power inductive load (W): | 100 |
Assembly type: | DIN-rail / Distribution panel |
Qubino Din Dimmer User Manual
Qubino Din Dimmer Extended User Manual/Installation Manual