Home Smart Home ZigBee Controllers / Smart Hubs Home Assistant Yellow - With CM4 module
Nabu Casa

Home Assistant Yellow - With CM4 module

SKU: HA-Yellow-CM4
222.90 €
This product is out of stock.
Monitor Product
Monitor produkt
Out of stock
Delivery: -

Create the best smart home ever! Private and local with Home Assistant Yellow!

- Made for Home Assistant
- Built-in SkyConnect with Zigbee/Matter/Thread
- Upgradeable
- Includes Compute Module 4
- M.2 Slot for an SSD

  • Tip
    Tell a friend
  • WISH
Share:
  • Product description
  • Specifications
Product description

This flagship version of Home Assistant Yellow is ready to go out of the box. It comes pre-assembled in a custom enclosure with a Raspberry Pi Compute Module 4 (CM4) and a custom heat sink for fanless, silent operation.

The CM4 is a version without wireless and has 2 GB RAM and 16 GB eMMC storage. Pre-installed with Home Assistant. To get started, just plug in the power supply and the Ethernet cable. The cables are included in the box. This variant does not have Power-over-Ethernet.

Specifications
  • Carrier board for Raspberry Pi Compute Module 4 (CM4)
    • CM4 board-to-board connector
    • Supports direct boot from NVMe devices (e.g., for CM4 Lite)
    • 12 cm x 12 cm
    • Compatible with all 32 variants of CM4
      • Quad-core Cortex-A72 (ARMv8) 64-bit / 1.5 GHz
      • Up to 8 GB RAM
      • Up to 32 GB eMMC
      • Regulatory approval does not cover wireless variants
  • Integrated smart-home wireless (Silicon Labs MGM210P Mighty Gecko Module)
    • Supports Zigbee 3.0, OpenThread, and Matter
    • 2.4 GHz radio with TX power up to +20 dBm
    • 1024 KB flash program memory, 96 KB RAM data memory
    • Pre-installed with Zigbee 3.0 firmware (EZSP), can be upgraded
  • Expansion slot
    • For NVMe SSDs (M-Key)
    • M.2 socket M-Key
    • Supports 2230, 2242, 2260, and 2280 modules
    • PCIe x1
    • Note: Google Coral AI Accelerator not working, details in this issue
  • Gigabit Ethernet
  • 2 x USB 2.0 Type-A host port
  • 1 x USB-C 2.0 device port (Silicon Labs CP2102N USBXpress USB bridge)
    • UART mode (default): debug USB-to-serial adapter
    • USB mode: CM4 USB 2.0 interface for USB recovery
  • High-quality stereo audio DAC
    • 2 V RMS line-out on 3.5 mm audio jack
    • SNR 106 dB
  • 2 x Push button
    • Red: Factory reset
    • Blue: To be determined
  • RTC backed by CR2032 battery
  • Status LEDs (can be powered off during regular operation)
    • Red: Power
    • Green: Disk usage
    • Yellow: Home Assistant system state
  • Power
    • 12 V / 2 A through barrel DC power jack (5.5 mm x 2.1 mm)
    • Typical power usage
      • Idle ~1.5 W
      • Idle with NVMe ~2.5 W
      • Load ~5-9 W
  • Enclosure
    • 123 mm x 123 mm x 36 mm
    • Translucent injection-molded polycarbonate plastic
    • Tool-free assembly
    • Accommodates custom heat sink (included)
Radio technology: ZigBee
Radio technology: ZigBee,Bluetooth,Matter via Thread,Matter via Ethernet,Thread
Radio technology: ZigBee,Bluetooth,Matter via Thread,Matter via Ethernet,Thread
Radio technology: Thread
Radio technology: Bluetooth