SWEDEN
INTERNATIONAL
- Product description
- Specifications
24V tube motor for installation in blinds. Included adapters are intended for tubes with an inner diameter of 20mm.
The motor allows you to set two end positions where it will always stop. It has no built-in logic. The direction can be changed by reversing the poles.
For control with Z-wave, we recommend Qubino Flush Shutter DC.
If you need adapters for a specific type of blind, you can find them here.
For installation information, see our guide!
If you want a complete kit with everything you need to get started, you can find it here. It is also available with two or three motors.
For specifications, see below.
- Torque: 0.3 Nm
- Speed: 25 rpm
- Max load: 3 kg (weight of the roller blind)
- Power supply: 24V/0.3A
- IP rating: IP40
- For installation in 20mm pipe
- Mounting brackets for wall or ceiling installation included
- Start and stop positions set electronically
- Motor length: 23.5 cm
- Dimensions after installation:
- Distance from wall to center of motor: 4.3 cm
- Width of wall bracket + motor, motor side: 1.6 cm
- Width of wall bracket, opposite side: 1.4-1.7 cm (movable part)
Vi säljer ett flertal olika rullgardinsmotorer för vanligt förekommande rullgardiner som t.ex. Ikea och Jysk. Här går vi igenom hur de fungerar, och vad man ska tänka på!
I denna guide går vi igenom hur du gör för att montera/byta adaptrar på våra tubmotorer till rullgardiner.
Om du styr gardinerna via Z-Wave kan du ställa ändlägena på två sätt - vi visar hur!
Tubmotor 24V for 20mm tube added to cart
You might need these products as well!
