- Product description
Proven design, sophisticated technology and still better - the new Roller Shutter 3! The FIBARO Roller Shutter 3 features the Z-Wave Chip GEN5 and is Z-Wave Plus certified. As usual, you integrate your roller shutters, awnings, electric blinds and garage doors into the Z-Wave network.
FIBARO Roller Shutter 3 is a universal, Z-Wave compatible, electric motor controller. The device allows for controlling motors of roller blinds, awnings, venetian blinds, gates and others, which are single phase AC powered. FIBARO Roller Shutter 3 allows for precise positioning of a roller blind or venetian blind slats.
Precise positioning is available for the motors equipped with mechanic and electronic end switches. The module may be controlled wirelessly, through the Z-Wave network main controller, or through the switch keys connected to it. It’s also possible to combine few devices into groups of devices, which then can be controlled simultaneously. In addition, FIBARO Roller Shutter 3 is equipped with Power Metering.
Power supply: 110 - 240 V AC 50 - 60 Hz
Power consumption: up to 0,8 W
Dimensions (L x W x H): 42 x 37 x 20 mm
Rated load current: 4,2 A for lamps and resistive loads 1,7 A for motors with compensated power factor (inductive loads)
Radio protocol: Z-Wave Plus
Radio Frequency: 868,4 MHz EU
Range: up to 50 m outdoors up to 30 m indoors (depending on building materials)
|Max power (W):||966|
|Max power inductive load (W):||391|
|Voltage:||230V AC 50Hz|