Drivdon Z-wave 30W 250-1000mA - Dimmable - Constant Current

This is a 30W Dimmable LED Driver with 1 channel constant current output and adjustable current from 250mA to 1000mA using DIP switches on the driver. It is designed with 200-240VAC input. Power factor of the driver can be over 0.9 and efficiency is higher than 83%. It enables smooth and deep dimming to 0.1% without flickering and buzzing noise. The driver is designed with Z-Wave Plus control interface which can be included to Z-Wave network and be controlled from your controller or hub interface. The driver can be compatible with universal Z-Wave gateway or primary controller. In addition, the Z-wave device can bind with Z-wave remote or wall controllers and be controlled by them.

Key features:

- Dimmable LED Driver, Max output power 30W
- 1 channel constant current output and adjustable current from 250mA to 1000mA
- Class II Power Supply, full isolated plastic case
- Rubycon capacitors
- Built-in active PFC function
- High power factor and efficiency, PF > 0.9, Efficiency > 83%
- Z-Wave Plus control interface which can be included to Z-Wave network and be controlled from your controller or hub interface
- To switch and dim single colour LED lighting
- Smooth and deep dimming to 0.1% without flickering, no buzzing noise
- IP20 rating, suitable for indoor LED lighting applications

Please note:

Max output voltage is 48V. Due to this restriction you won't achieve maximum effect in all configurations. Please refer to the table below for some examples: