Drivdon Z-wave 1 channel 12VDC 50W - Dimmable - Constant Voltage.
SKU: SRP-ZV9105-12-50-CV• Dimmable Constant Voltage LED driver, Max. output power 50W
• 1 channel 12VDC constant voltage output
• Class II power supply, fully isolated plastic case
• Rubycon capacitors
• Built-in active PFC function
• High power factor and efficiency, PF > 0.9, Efficiency > 85%
• Compliant with Safety Extra Low Voltage standard
• Short circuit, over load, over temperature protection
• Z-Wave Plus enabled slave controller
• Compatible with universal Z-Wave gateway or primary controllers
• Smooth and deep dimming to 0.1% without flickering, no buzzing noise
• To control constant voltage single color LED lighting
• IP20 rating, suitable for indoor LED lighting applications
- Product description
- Specifications
SRP-ZV9105-50W-CV is a 50W Dimmable Constant Voltage LED Driver with 1 channel 12VDC output. It is designed with 200-240VAC input. Power factor of the driver can be over 0.9 and efficiency is higher than 85%. It enables smooth and deep dimming to 0.1% without flickering and buzzing noise.
The constant voltage driver is designed with Z-Wave Plus control interface which can be included to Z-Wave network and be controlled from your controller or hub interface. The driver can be compatible with universal Z-Wave gateway or primary controller. In addition, the Z-Wave device can bind with Z-Wave remote or wall controllers and be controlled by them.
Output:
LED Channel: 1
DC Voltage: 12 VDC
Max. Current: 4.16 A / 2.08 A
Voltage tolerance: ±1%
Rated Power: Max 50 W
Input:
Voltage Range: 200-240V AC
Frequency Range: 50/60 Hz
Control:
Dimming interface: Z-wave
Dimming Range: 0%-100%
Dimming Method: Pulse Width Modulation
Protection:
Short Circuit: Yes, recovers automatically after fault condition is removed
Over Current: Yes, recovers automatically after fault condition is removed
Over Temperature: Yes, recovers automatically after fault condition is removed
Rating:
IP20
Voltage: | 230V AC 50Hz |
---|---|
Size (WxDxH): | 210 x 50 x 32 mm |
Z-Wave plus: | Yes |
Max power (W): | 50 |
Assembly type: | Mounting |