Home Smart Home 433MHz Blinds & Awnings Tub motor battery-powered for 20mm pipes, built-in 433MHz receiver -
BOFU

Tub motor battery-powered for 20mm pipes, built-in 433MHz receiver -

SKU: ERB16-0.3/28
84.90 €
This product is out of stock.
Monitor Product
Monitor produkt
Out of stock
Delivery: -

Battery-powered tube motor with built-in 433MHz receiver for installation in roller blinds. Included adapters designed for tubes with an inner diameter of 20mm.


This charger is needed to be able to charge it up.

  • Tip
    Tell a friend
  • WISH
Share:
  • Product description
  • Specifications
Product description

For information about installation, please refer to our guide.

Battery-powered tub motor with built-in 433MHz receiver for installation in roller blinds. Included adapters are intended for tubes with an inner diameter of 20mm.

To control with Telldus Tellstick, use RollerTrol.
To control with RFXTrx, use T0
To set the end positions, you also need a remote control as neither Tellstick nor RFXTrx can currently send the commands required to configure the motor.


Motor manual.
Specifications
  • Torque: 0.3 Nm
  • Speed: 25 rpm
  • Battery Size: 2000mAh
  • Max Load: 3 kg (weight of the roller blind)
  • IP Rating: IP20
  • For installation in 20mm pipes
  • Mounting brackets for wall or ceiling included
  • End positions are configured via remote control (sold separately)
  • Motor Length: 37 cm
  • Compatible with Telldus Tellstick