Danfoss TWA-Z 230V NC - On / Off actuators for waterborne underfloor heating
SKU: 082F1600Danfoss TWA-Z is an on / off actuator for water-borne underfloor heating that is controlled with 230V AC. The actuator is closed in powerless state (NC).
- Product description
- Specifications
Danfoss TWA-Z is an on / off actuator for waterborne underfloor heating that is controlled with 230V AC. The actuator is closed in powerless state (NC).
Fits directly without adapter on some of Upnor's shuntar.
To control via Z-Wave, the appropriate Z-Wave thermostat must be used, such as any of the following:
- Flush On/?Off Thermostat 10A - Qubino
- Wall Thermostat with LCD display plus actuator - Kit
- Wall Thermostat with LCD display + optional Z-Wave switch.
The actuator reacts slowly and it takes about 5-10 minutes to change mode. This built-in inertia makes it work well to control underfloor heating with on / off thermostat.
NOTE! Can not be mounted upside down.
- Type: TWA-Z
- Max. medium temperature: 120°C
- Min. stroke: 2.8 mm
- Frequency: 50/60 Hz
- Cable length: 1.2 m
- Power supply: 230 V AC
- Weight: 0.15 kg
- Type: NC
- CodeNumber: 082F1266

VVS-Adaptrar är en djungel och det är allt annat än lätt att veta vilken adapter som behövs och passar till vilken termostatventil. Vi går igen de vanligaste adaptrarna och när de passar.