Drivdon Z-wave 4 kanal 24 VDC 100W - Dimbar - Constant Voltage

SKU: SRP-ZV9105-24-100CVF
116.90 €
Stock status: Few left
Delivery: 1-3 Days

 • Dimmable 24V PWM RGBW LED Driver

• 4 channel 24VDC constant voltage output

• Class II power supply, fully isolated plastic case

• Rubycon capacitors

• Built-in active PFC function

• High power factor and efficiency, PF > 0.9, Efficiency > 85%

• Compliant with Safety Extra Low Voltage standard

• Short circuit, over load, over temperature protection

 • Z-Wave Plus enabled slave controller

• Compatible with universal Z-Wave gateway or  primary controllers

• Smooth and deep dimming to 0.1% without flickering, no buzzing noise

• To control constant voltage RGBW LED lighting

• IP20 rating, suitable for indoor LED lighting applications

  • Tip
    Tell a friend
  • WISH

SRP-ZV9105-12-100W-CVF is an UL and ENEC approved 100W dimmable PWM RGBW LED driver with 4 channels 24VDC constant voltage output and 100-277VAC universal input. Power factor of the driver can be over 0.9 and efficiency is higher than 90%.

It enables smooth and deep dimming to 0.1% without flickering and buzzing noise. The PWM LED driver is designed with Z-Wave Plus control interface which can be included to Z-Wave network and be controlled from your controller or hub interface. The driver can be compatible with universal Z-Wave gateway or primary controller. In addition, the Z-Wave device can bind with Z-Wave remote or wall controllers and controlled by the them. The driver can control RGBW LED lighting. UL and ENEC certification ensures high safety performance of the driver to be used worldwide.

 LED Channel: 4
 DC Voltage: 24 VDC
 Max. Current: 4,1A
 Voltage tolerance: ±1%
 Rated Power: Max 100 W

Voltage Range: 200-240V AC
 Frequency Range: 50/60 Hz

Dimming interface: Z-wave
 Dimming Range: 0%-100%
 Dimming Method: Pulse Width Modulation

Short Circuit: Yes, recovers automatically after fault condition is removed
 Over Current: Yes, recovers automatically after fault condition is removed
 Over Temperature: Yes, recovers automatically after fault condition is removed


Z-Wave plus: Yes
Size (WxDxH): 244x 64 x 32 mm
Max power (W): 100