- Product description
High quality, weather protected LED strip for 12V drive voltage with 60 RGB-LEDs per meter, which at full brightness can draw up to 19.2W / m.
To control the LED strip, the respective channels are grounded. It works perfectly well to control the strip with the Fibaros RGBW controller, or any microcontroller via N-channel MOSFETs.
The LED strip is weatherproof and has a white background, on the backside there are 3m double-sided tape that attaches to most surfaces that are smooth. Note b> that the strips are not designed to be immersed in water or exposed to UV light (sunlight) for any longer periods of time.
To power the LED strip you need to have a good 12V power supply u>.
The strip can be cut with pliers every fifth centimeter. The weather protection can easily be cut away with a sharp knife.
The strips comes in rolls of 5m but are sold per meter b>! If you buy 5m you get a whole roll. If you buy less, you will get a coherent strip cut from roll without guarantee that either end is contacted. Appropriate contacts are available here . p>
Width: about 10mm p>
Maximum consumption: 19.2W/m
Type of weatherproofing: Silikonbeläggning
|LED density:||60 LED/m|