m punkt nu

LED Strip RGB+Cold White 12V, weatherproof 60 LED/m (1 m)

SKU: LS-RGBCW-C
14.90 €
Stock status: 20
Delivery: 1-3 Days
High quality, weather protected 12V LED strip, with 60 RGBW LEDs per meter, which at full brightness can reach up to 19.2 W/m.
Can be controlled using Fibaro RGBW controller, or any micro controller via N-channel MOSFETs.
  • Tip
    Tell a friend
  • WISH
Share:

High quality, weather protected 12V LED strip, with 60 RGBW LEDs per meter, which at full brightness can reach up to 19.2 W/m. The white portion of each LED is cold white, with an approximate color temperature of 6500K. The weather proofing consists of a silicon layer on the front of the strip.
Can be controlled using Fibaro RGBW controller, or any micro controller via N-channel MOSFETs.
The LED strip is weatherproof and has white PCB, on the backside there is 3M double-sided tape that attaches to most smooth surfaces Note that the strips are not designed to be submerged in water or exposed to UV light (sunlight) for longer periods of time.

To power the LED strip you need to have a good 12V power supply .
The strips comes in rolls of 5m but are sold per meter ! If you buy 5m you get a full roll. If you buy less, you will get a coherent strip cut from roll without guarantee that either end is contacted. Appropriate contacts are available here .


Width: about 10mm

LED density: 60 LEDs/m
Width: 10mm
Voltage: 12V
Maximum power: 19.2W/m
Color temperature (white): 6500K
Weatherproof type: Silicon coating
Color: RGBW
Color temperature: Cold White
Estimated color temperature (K): 6500
LED density: 60 LED/m