m punkt nu

Voltage Injector 5v [Version 2.0b - Screw Terminals]

SKU: injekt5v20b
16.90 €
Stock status: 1
Delivery: 1-3 Days
With the voltage injector, you power up your 1wire network to run more power-consuming things like LED detectors or LCD displays.
NOTE! The voltage injector is usually not needed if you are using the USB adapter DS9490R - the voltage ...
  • Tip
    Tell a friend
  • WISH
Share:
With the voltage injector, you power up your 1wire network to run more power-consuming things like LED detectors or LCD displays.
NOTE! The voltage injector is usually not needed if you use the DS9490R USB Adapter - the voltage is automatically downloaded via the USB port!
Facts:
  • Has a protective diode to reduce the risk of damage in case the input voltage is wrong.
  • The power plug 2.0b has screw terminals for all connections.
  • Connect the voltage injector to a transformer / power supply that leaves + 7-12V. (9V recommended).
  • You should not load the injector with more than about 100mA in continuous operation. However, the injector can withstand short peaks of up to 500mA.
  • When thehe voltage injector is active, a red LED will light up.
  • If you select a plastic box you will receive a completely unprocessed one which means that you have to drill the appropriate number of holes in the box by yourself.