2GIG

Glass Break Detector 433MHz

SKU: 2GIG-GB3-433
48.90 €
Stock status: 5
Delivery: 1-3 Days

The Glass Break Detector (2GIG-GB3-433) is a fully-supervised, tamper- protected, ceiling- or wall-mounted unit.

It communicates with the control panel using the 433 MHz frequency. It provides a 15 ft (4.6 m) maximum detection range, 360° maximum horizontal sensing angle, and dual-stage glass break detection.

  • Tip
    Tell a friend
  • WISH
Share:

The Glass Break Detector (2GIG-GB3-433) is compatible with VeraSecure only.

The Glass Break Detector (2GIG-GB3-433) is a fully-supervised, tamper- protected, ceiling- or wall-mounted unit.

It communicates with the control panel using the 433 MHz frequency. It provides a 15 ft (4.6 m) maximum detection range, 360° maximum horizontal sensing angle, and dual-stage glass break detection

Wireless Signal Range: 350 ft (106.7 m), open air, with Wireless Control Panel
Code Outputs: Alarm, Alarm Restore, Tamper, Tamper Restore, Supervisory, Low Battery
Transmitter Frequency: 433.92 MHz (crystal controlled)
Unique ID Codes: Over one (1) million different code combinations
Supervisory Interval: 70 minutes
Sensor Type: Single microphone, dual stage thud, and crash
Maximum Horizontal Sensing Angle: 360° for ceiling mount or 180° for wall mount
Dimensions: (D x H) 4.55 x 1.9 in (11.56 x 4.83 cm)
Weight (including battery & bracket): 5.1 oz (144.6 g)
Housing Material: ABS plastic
Color: White
Operating Temperature: 32°-120° F (0°-49° C)
Relative Humidity: 5-90% Non-Condensing
Approved Glass Break Sensor: IntelliSense FG-701
Certification: CE and RCM